Post your overclock!

[playafly187]

running my 1700 XP @ 2161 MHz currently.... 43-44 C load temps, SUPER SILENT SYSTEM!

[striker777]

Running my 2600+ Barton at 2600+

Overclocking is CRAZY I tell you CRAZY!!!!!

yeah its crazy........CRAZY SPEED!!!!!! MUWAHAHAH!!!!

[MASSiVE]

Running my 2600+ Barton at 2600+

Overclocking is CRAZY I tell you CRAZY!!!!!

yeah its crazy........CRAZY SPEED!!!!!! MUWAHAHAH!!!!

anyone here that knows if the Tbred B's 2600+ will be a good oc'er? i would oc, but only if i can gain enough, now its on 166,4*12.5, but could i get it at 200*12 with aircooling? now i still have a arctic super islent thats rated for a 2200+ on my 2600+ :( i think ill wait till the contest is over, that swiftech beauty would sure as hell give me some much better temp's then that POS arctic cooling :(

[fstroupe]

temps: 31C-35C idle, 41C-48C load, depending on how much dust is in heatsink/ambient temp

http://s87060208.onlinehome.us/pic/Screen02.JPG

guess you could say it is a pretty woosey overclock...

2500+ Barton, Abit NF7-S Ver2, 1gig Geil Golden Dragon 2-3-3-6, Antec True430, ThermalTake Silent Boost

[silenze]

anyone here that knows if the Tbred B's 2600+ will be a good oc'er? i would oc, but only if i can gain enough, now its on 166,4*12.5, but could i get it at 200*12 with aircooling? now i still have a arctic super islent thats rated for a 2200+ on my 2600+ :( i think ill wait till the contest is over, that swiftech beauty would sure as hell give me some much better temp's then that POS arctic cooling :(

if your multiplier is unlocked and you have the ram/chipset to do it, probably :)

[jurtje]

Thanks to you guys and especially to silenze, I also managed to overclock my system. (god, that sounds n00b)

Here we go:

Xp 3200+ @ 11.5*210 = 2415 mhz @ 1.85v
with the volcano 12 HSF on manual
on my asus a7n8x-e deluxe
with 2*256 corsair twinx 3200ce @ 215 mhz 2.5 - 3 - 3 - 9
my on board SiI raid controller has
2*80 gb barracuda 8 mb 7200.7 SATA on raid-0
video is my club 3d fx5900xt @ 475/780
pinnacle pctv pro
LG dvd 16x
LG dvd +- burner
This all stuffed in my raid max 668 with it's 420 watt PSU
Looking at a viewsonic G90fb 19" and a Philips 105E 15".

Sisoft:
dhrystone ALU 9366
Whetstome FPU 3897
Integer aEMMX 23350
Float 24918
RAM Int 3196 MB/s
RAM Float 2981 MB/s

Atto HD benchmark: 83 MB/s

Aquamark 3 42.247

The Cpu temp I keep at about 46 degrees, idle @ 3200 rpm, full load 53 degrees
A few things:

- Something's odd with my video card. I've tried to flash it with other bioses a couple of times (5950u, 5900), but if I get windows to start up, it's one big artifact. Also I can't clock beyond 475/779. If I raise the mem higher, the thing doesn't pass it's test, if I raise the core any higher performance drops quickly. Last strange thing, eventhough 'apply at startup' is checked, it always resets itself to 475/700 :?

-The on board raid controller is not very impressive, did not know that at the time. When my account status is better, I will think about a promise controller. :wink:

So, as you can see, a nice system but with very typical behaviour. Maybe that's what makes it special......

[jurtje]

I hate you and your videocard!!!!!


***drooling of jealousy****

[silenze]

Yeah my video clocks reset on reboot too, (common problem for a lot of people) but usually just the memory clock, the GPU seems to stay.

[KryoNexus]

Yeah my video clocks reset on reboot too, (common problem for a lot of people) but usually just the memory clock, the GPU seems to stay.

lol, well if ya don't really like it.... ;-)

[CoffeeShark]

Got my 3.2 up to 3.8, not bad for aircooled.
ati 9800xt oc'd a bit, too.
2gb mem at 2.5-3-3-5

http://www.xmeld.com/cpuz.jpg

[Beemer]

Well, though it isnt finished yet I am going to post my system specs as of now. I still have a lot of tweaking:

p4 3.0 @ 3.65 Thermalright sp94 heatsink with 92mm panaflo 1.65 volts
Abit IC7-Max3
1GB Corsair XMS pc 4000 ddr (another gig is on its way and hopefully will be here in time for the lan) :wink:
ATI radeon 9700 pro (well its running as a 9500 non pro right now, I will be sending it back after the lan)
550Watt Antex power supply
Seagate barracuda 80GB sata
52x sony cd burner
16x samsung dvd drive
Sound Blaster audigy
digi doc 5+
various fans (yea, theres a lot)

I hope to get a pair of 36GB raptors to set up in sata raid sometime soon.


My other box:(server box for the upcoming lan)

Athalon XP 2800+ no OC
Abit AT7 Max2
AIW 9600 pro
1GB crucial pc 2700
420 watt Antec Power Supply
4x DVD Burner
16x DVD
120 GB seagate Barracuda sata HD

[leezard]

XP 1700 @ 2.3 (11.5 X 200) It will go higher but not much need, all its used for is playing UT and FarCry

512mb of PMI pc3200 turbo mem
abit nf7-s rev 2.0
2 X maxtor 40gig HDDs
I/O 8x dual format DVD burner
LiteOn DVD Rom
FIC 9600 Pro
Aircooled (currently) with HT 101 heatsink w/dual fans and 6 80mm case fans.

[Axeman098]

Okay, see sig below for specifics, but I got my Asus P4P800 Deluxe with a Northwood 3Ghz to 3.67Ghz (980fsb 245x4!) I could probably hit 3.8Ghz at 1000fsb(250x4), but I'm only using Crucial PC3200 memory. MY biggest issue is, I can raise the memory and CPU voltages a bit, but I am still running memory by SPD. Can anyone give suggestions on the memory timings(clocks) for Crucial PC3200? I ain't got a clue. :shock:

[GigaHz]

EPoX 8RDA+
12.5 x 203 @ :arrow: 2537.01MHz
Athlon XP 1700+ DLT3C JIUHB - 0310 WPMW
2 x 256mb Corsair 3200 XMS

Thermalright SLK-900U + Thermaltake V9 Smartfan

NorthBridge > Lapped 8RDA+ HS + coolermaster fan

12.5 x 203 @ 2537.01MHz

vCore @ 1.775v - vDimm @ 1.7v

Memory Timings @ 2.5 - 3 - 3 - 8

Temeratures @ 40ºC Idle and about 48ºC Loaded



http://www.geocities.com/antiscrewcrewuk/oclock.html
That link take a little while to load in but its a CPUID file. :arrow:

[jurtje]

Damn Gigahz, That's an awesome overclock! How the hell did you get your xp1700 to do that?

[GigaHz]

Hi , thanks ,


I think i must got one of them good 1700+ 's ... i want too see how far i can push it , because i have 2 other computers now .

So im going to get a VapoChill for my Lan Party board and the Intel P4 2.6 NW , But before i install it im going to try it on the trusty ole 1700+ and how far it would go :lol: ...if it blows up :twisted: ... i'll will miss it ive had it as a back up PC for ages :cry:

What ever it does i plan on posting what could be my highest clock ever :lol:

[jurtje]

Fix your sig, or do you have really special mem?

Waiting for those overclock results (and benchmarks).

[GigaHz]

Im to tired to fix the sig just now ...

lets just call it Corsair SuperXMS for now :wink:

The only OverClock results i have just now are the ones from WCPUID that i posted ... im not on the 1700+ system just now ... im on NF7-S rev 2.0 Athlon XP 3000+

Im going to Overclock it more when i get a VapoChill for my P4 ... about 3 weeks when i have some more money .

Just bought this NF7 setup last week :?

[tcheat]

Here are my two systems.

2500+@3200+ 1.65Vcore 46c load Dr. Thermal tti v77
Shuttle AN35N Ultra Nforce 2 mobo
2X512 DDR 400 (1 Kingston Value and 1 Generic) @ cas 2.5 3-3-7
Powercolor 9600 PRO 128Meg 450 core 350 memory
2XSeagate 80 Gig Hdds
Sony 16X DVDROM
LiteOn 16X10X40 CDRW
Creative Audigy
19" AOC FLAT Monitor

2200+@1890Mhz 1.6Vcore 54c load Modded AMD stock HSF
MSI K7T Turbo 2 Kt133a mobo
2X256 PC133 Crucial @140 cas 2 (155 cas 3 max)
Geforce 2MX 200 64 Meg
2XMaxtor 40 Gig Hdds
Lite On 16X DVDROM
Acer 10X4X32 CDRW
SBLive! 5.1
17" Viewsonic FLAT Monitor


Soon Im going to do a rebuild on the first system with a water cooling setup, better ram and a x800pro.

[playafly187]

just ran Sandra 2004 SP2 and here is what I got:

http://www.ocia.net/playafly187/sandra1.jpg

http://www.ocia.net/playafly187/sandra2.jpg

http://www.ocia.net/playafly187/sandra3.jpg

XP 1700 @ XP 2600 speeds...

[ViperX883]

Here are my system specs:

P4 2.6c @ 3.25 w/ stock HSF
ABIT IC7-G on Aspire 500W PS
1024 (2x512 A-Data) Mb PC4000 @ 500 MHz Dual 1:1 3-4-4-8
3 x 80Gb Maxtor DiamondMax9 ATA/133 7200RPM w/ 8 Meg Cache in RAID 0 on Highpoint RocketRAID 133 for Microsft Windows XP Pro
1 x 40Gb Maxtor ATA/133 7200RPM w 2 Meg Cache for Fedora Core 2
Radeon 9800 Pro @ 412/730 (XT Speeds)
TDK 440N DVD+/- RW
Sound Blaster Audigy 2

3DMark03: 6390 @ 412/730 3DMark2001 SE: 19416
AquaMark3: 47626 @ 412/730 PCMark04: 5185
Sandra Memory Bench: 6018 Mb/s Integer 5952 Mb/s Float
HD Tach: 84 Mb/s
Lots of Eyecandy

[Bio-Hazard]

Here's one of my better ones with a locked AMD 2500 Barton (11x220)

http://members.lycos.co.uk/sbrehm72255/hpbimg/Super-Pi.JPG

[mtfresh]

I've had my system that is in my sig up to 2.7ghz before running at 13.5x200
or 12x228 with my bh-5 and that's with only using 1.80vcore., 8)

[Alfonse]

Got my Thermalright SP-97 w/Panaflo 92mm yesterday! Then I decided I wasn't going over 1.8vcore anyway.

Here's my OC:
http://cec.stopkincaide.com/img/oc8-19-04.gif

I'm not quite sure why my Raptor is underperforming, it's 30% full, but yeah, not doing very well.

And here's a pic of my comp:
http://cec.stopkincaide.com/img/comp8-19-04.jpg

Stats:
Case: Lian-Li PC-V1100B
Power: Enermax 400w Dual-fan w/speed control
Mobo: DFI Lanparty NF2 Ultra B
CPU: Athlon XP-M 2500+ @ 2497mhz (217x11.5) - 1.8v
HS&F: Thermalright SP-97 & Panaflo BX High 92mm
RAM: Corsair XMS 3500 Rev 1.1 1024MB 2X512 @ 434 - 2.2.2.5 - 3.0v
Video: Visiontek Geforce 4 ti4600 w/Thermaltake cooler
HDD: WD Raptor 74gb + Maxtor 40gb (junk)

[undergroundtech]

I have my Mobile 2600+ currently running 12.5x200 = 2.5Ghz @ 1.65v
temps about 40c under full load.
Probably get 13x200 if I up the voltage
also running crucial memory so my FSB is not what it could be

http://img.photobucket.com/albums/v407/undergroundtech/CPU-Z.jpg

Update:
I can't get it to run very long at 2.6 and am noticing some voltage spikes on my Vcore that has me a little nervous,
I think its my 300 watt PSU about to choke under the strain.
**Me places an order @ newegg for an Antec NeoPower 480**
Hopefully when it arrives in a couple days it will fix the problem and I'll be able to sleep a little better at night.

[silenze]

Alfonse: You should use the hyperthreading results for the pentium 4's in your sandra graphs... otherwise they're worthless. ;)

[SlipSand]

READ SIGGIE!

Bad cores...free heatsinks. I dont give a crap about temps until MBM5 beeps at me. Ive had my temp go as high as 77 and still play CS.
Alpha Pal...getting ThermalTake Heatpipe soon free also.

Anyway. 1.85V 200mhz X 12 = 3400+ speeds. I cant go higer I might unlock multiplier and keep synchronized wit mem at 333 and go like 3600+ on 333. Not sure. Maybe voltage mods?

Vid card = 5900U256 Uhh... 3D- 510/940, 2D- 420/940.
Yeah that says 420. :D
Stock cooling on Vid.

[playafly187]

Gigabyte GA-8KNS, Athlon 64 3000+, 512mb Corsair 3200 RAM, 74 GB 10,000 rpm Raptor Hdd. Running @ 218 memory below:

http://www.ocia.net/playafly187/occpu.jpg

http://www.ocia.net/playafly187/ocmulti.jpg

http://www.ocia.net/playafly187/ocmem.jpg

http://www.ocia.net/playafly187/newhdd.jpg

[SlipSand]

http://www.fox302.com/userdata/SlipSand/files/OC/cpuz.JPG

http://www.fox302.com/userdata/SlipSand/files/OC/latency.JPG

Tis beat.

[Ojibewa]

I'm new here, from the futuremark forums,,,

http://img.photobucket.com/albums/v402/ojibewa/185.jpg

[/img]

[Caj Darkmoon]

I'm new here, from the futuremark forums,,,

http://img.photobucket.com/albums/v402/ojibewa/185.jpg

[/img]

Welcome man! I used to visit those forums.

[playafly187]

Update on my system. Ive actually been meaning to post this for a while, but my system now runs 225 FSB stable.

hoping to get a little higher when I review this thermalright xp-90 :)

[jester]

I moved some of my case fans around this morning and my mobo temp droped 3c along with an idle cpu temp of 35c !. Ive got the cpu bumped up to 3.5g (almost a 1g jump) and Ive ran the sandra burn in test for 10 mins with no probs. Im gona so some more tweaking and see just how high I can take it, then Ill post some benchmarks.

[Odium]

Air Cooling
http://img120.exs.cx/img120/2686/ovrclk3.jpg

[jester]

Nice !!

What heatsink and case fan setup are you runin?

[silenze]

Yeah, good OC... 1,800 --> 3,455... almost double. 8)

[Odium]

I have gotten her upto 3.8 before, im using 3 power supplys right now, 1 is running hard drives (3) and the other is running my fans and cd-rw's, 1200watts total, and they are ALL maxed out.


Im using a ThermalTake, i think it is an orb, 6000rpm copper heatsink. I can reach 4.1 ghz in bios, winblows will not let me go further.

[KryoNexus]

you're usin a 4:1 DRAM ratio? i'd say you might've gotten the deal of the century on this chip.

[DaMiEn]

nothing too out of the ordinary for me. I'm running my AXP 2600+ (barton) at 2300 mhz. 200fsb and at 1.84 vcore. and it's watercooled

[deadly-app]

I'll do my past system as i havent setup my wcing on my A64 yet.
but it was
AMD XP 2500+
Aero 7 lite
MSI K7n2 Delta-L
Geil 256x2 3200 dual channel.

I ran the board up to 220 FSB running @ ~2.4ghz, 1:1 ratio. Temps were a little too high, around 52 idle, so i dropped it to 210 FSB at 46 idle.

Cant wait to OC my A64, dual loop watercooling :) pelts, fun stuff!!111

[silenze]

New processor... s-754 3400+ 2.4Ghz / 512kb..

Dropped the multiplier .5, the HTT's to 3x, and set the DDR to 5/6 "166".. then started moving the frontside bus, made it to 240Mhz fsb / 2,760Mhz @ 1.75v, brought my ram back to spec.. aircooled with the XP-120 and a fan pushing ~80CFM, 32° C idle 54° C load with just the white goop..

http://www.fawkit.org/tmp/images/sandra/3400+/2760_cpuz.jpg

http://www.fawkit.org/tmp/images/sandra/3400+/2760_arith.jpg

http://www.fawkit.org/tmp/images/sandra/3400+/2760_mm.jpg

[playafly187]

more overclocking:

http://www.ocia.net/playafly187/cpuida.jpg

[XPTB]

Playafly just convinced me to overclock mine again, even though things tend to explode when I mess with them.

AMD 64 2800+ which is 1.8 ghz stock, now its at 2.19 ghz. pretty decent. The processor was holding me back the rest of the way. Ram was still rocking. this was 5:4 ratio that silenze did

[silenze]

Playafly just convinced me to overclock mine again, even though things tend to explode when I mess with them.

Yeah.. I brought that up when playafly mentioned it to me over AIM.. :lol:

[undergroundtech]

Now that I have better case cooling, I decided to push mine a little further also.

http://img.photobucket.com/albums/v407/undergroundtech/2.jpg

Hey... if ya can't beat em' ..... Join em' 8)

[XPTB]

Hey Underground, what barton chip do you have? 2500? That is a healthy overclock :mrgreen:

[silenze]

Ram was still rocking. this was 5:4 ratio that silenze did

:lol:

.. 5:6..

durrr :oops:

"166" in the bios...

[undergroundtech]

Hey Underground, what barton chip do you have? 2500? That is a healthy overclock :mrgreen:

Thanks...... I have the Mobile 2600+

[Bio-Hazard]

I was messing with my old 2500 Barton the other day after I put in some different ram and this is what I got out the system......LOL.

http://www.tech-mods.net/gallery/albums/userpics/10004/normal_CPUZ240.JPG

[Neo_Bui]

COOL !!! [smilie=thumbsup.gif]

[playafly187]

results of my new system (939), 1.8 ghz stock

http://www.ocia.net/articles/939oc/cpuz.jpg

500 mhz overclock, not bad, but i wanted more. memory bandwidth is good tho :mrgreen:

[reanimation_LP]

So, I can expect a pretty good OC from the Barton 2500+ right? :twisted:

Its gonna replace my Duron 900, which, surprisingly, is capable of running Doom 3. x.x

Cant wait to get my new mobo, my Barton 2500+, and my 1 GB of Corsair PC3200 RAM! XD

I'm gonna get the Chieftec Dragon case, and load it with fans, my CPU heatsink will be the Coolermaster X-Dream III which I won off of this site ^-^ Its running beautifully, cant wait to really give it a good testing with the Barton.

[playafly187]

Yeah, from what I have heard, the Barton 2500 is a pretty good overclocker. What mobo will you be pairing it with?

[reanimation_LP]

Right now I'm looking at the Soyo Dragon 2 KT880 Chipset, as it has so many features that I can use and would like to have on a board without having to have 3 thousand PCI cards. x.x Such as 4 IDE channels, Serial ATA, Gigabit Ethernet, USB 2.0 and Firewire, etc.

[silenze]

I used to run a 2500+ on an MSI k7n2 delta-l... ran great, from 166Mhz FSB to 200Mhz FSB without a prob, right up to 2.2Ghz / xp 3200+ speed.. if you get a Mobile 2500+, the multiplier will be unlocked.. unless they've changed something since the last time I looked.

[reanimation_LP]

From what I've heard AMD has fixed that to where we cant OC it to death :( Not fun.

[asw7289]

http://i147.exs.cx/img147/8831/2452ud.jpg

[asw7289]

I have a cd burner!? :P

[jurtje]

New system:

AMD 64 3200: 10*200 => 10*245, HT 5x
2*512 PC4000 Corsair, 3/4/4/10 => stock timings, 1:1, but 2T
6800 nu pci-e (NV41) => 325/600 => 450/860

Aquamark: 9732 / 10346 => 66196
Super Pi: 36 sec

Haven't come around to any other benches yet.

[El_Seano]

I just O/Ced my Pentium 2 333 to a 416. Not to bad, 25% increase. Originally upped the temp 18 or so degrees but I added some new thermal grease, and a vantech stealth 80mm fan and that brought it back down to original temps.

[The_Scream]

Athlon 64 3200 Winny got it up to 2.6 ghz
Corsair XMS Pro got it up to 360 fsb but the two don't work together
so I'm at 305 fsb 2.5,3,3,5 stock v's w/ 2.6ghz

1175 mem, and 420 core, on my 6800GT

[silenze]

I'm up to 2.73Ghz stable now with this OCZ pc3200 el gold.. 10.5x260 5:6 216Mhz 2-2-2-5 1T @ 2.8v.. found out this memory needs tons of voltage to OC... so getting a new board soon. :twisted:

[silenze]

This is for XPTB, because he wanted to see it. :mrgreen:

http://www.fawkit.org/tmp/300fsb.jpg

[undergroundtech]

http://img.photobucket.com/albums/v407/undergroundtech/CPU-Z.jpg
http://img.photobucket.com/albums/v407/undergroundtech/Sandra2005Arithmetic2.jpg

[silenze]

This is will crash if I try to benchmark... surprised it loaded Photoshop..

http://www.fawkit.org/2.85.jpg

[FunkZ]

I know, old AXP. One of these years I'll get around to upgrading to A64. :)

http://mywebpages.comcast.net/funkz/2700.jpg

[silenze]

Nice OC. [smilie=thumbsup.gif]

[FunkZ]

Thanks! Hope I can get as much as you and Playafly out of an A64 chip. I'm a bit leary of getting a new core as soon as they come out though. Been seeing mixed results with the Venice, some really good, some kinda poor. I got burnt when Barton first came out.

So you switched from the XP-120 to the 90c Silenze? Is the cooling difference huge or is it more dependent on the fan?

[silenze]

With the fans I used.. (46CFM 92mm, 79CFM 120mm), the XP90-C won by 7° C and it's smaller... I like it better :P

[Skypilot]

Dangit you guys convinced me to OC again... Ill have to post my OC when Im done, but ima noob, how do you take a screenshot of your OC?

[jester]

Dangit you guys convinced me to OC again... Ill have to post my OC when Im done, but ima noob, how do you take a screenshot of your OC?

Thats pretty easy, after you have cpu-z or what every you use opened hit the "print screen" key then go into what every image editor you have (if you dont have one use "Paint") & then just paste the image, resize the canvas & image down a lil & your set.

[Skypilot]

Now I know you guys are thinking "Ok this guy got a 100mhz OC, big deal" Youre right, this is a sissy OC but if I push it to far my mobo goes thru MAJOR mood swings and wont boot up for a day at least, and the only way it does boot is if i reset my cpu and bios and vid card and unplug all my accessories. So yes 100mhz is all im pushing call me a sissy, but technically I am. And Im 14, outta money, and sick of remounting my cpu, my arctic silver5 bottle is almost gone. Here it is.
http://i19.photobucket.com/albums/b184/skypilot7/oc.jpg

[Phil]

i got my 1ghz up to 1080... it lasted a good 3 minutes, i almost logged in to xp b4 it crashed...

[Skypilot]

LoL nice.

[leeglf]

i have got my amd 63 3000+ venice to 2205mhz not bad for my first overclock i think!!!

[playafly187]

i have got my amd 63 3000+ venice to 2205mhz not bad for my first overclock i think!!!

not bad, although im sure that venice still has a lot left in it 8)

[leeglf]

i have played far cry on it for a while at 2205mhz and it seems fine what test can i do to see if the overclock is stable i dont want to leave my pc on for endless hours.

after i have found a good test i will overclock it a bit more! any idea how high i can overclock my system safely.

[FunkZ]

http://www.ocia.net/articles/ocpt2/page2.shtml

[Phil]

http://i17.photobucket.com/albums/b82/phil_bodien/memory-2250.jpg
http://i17.photobucket.com/albums/b82/phil_bodien/cpu-2250.jpg

[my77stang]

im running 3000 venice at 2250 with a voltage of 1.5
got my 3-4-4-8 geil value series 2gb dual channel ram down to 2-3-3-6
twin 6800 256mb cards in SLI running 400 mhz core 800 mhz memory
twin seagate 80gb barracuda sata's running in raid 0 each with ultra twin fan HD coolers
Asus A8N-SLI mobo
Evercool wc-202 water cooling for CPU and both GPU's
Ultra X-Connect titanium green modular 500 watt PS with uv reactive cables
Case has side window with trucker mudflap chick on it,
inside sprayed with krylon glow in the dark paint
twin cold cathode blacklights

pretty pimp if you ask me

[jurtje]

Show us!

[leeglf]

yes i would love to see that system it sounds awesome show us pics

[my77stang]

lemmie get some pics to imageshack and ill throw em on here

btw when alt + tab'in outta battlefield 2, my video gets real screwy and when i manage to get back into game the screen flickers a orange color cant get rid of it till i quit game. any ideas if its ram core or bus timings on the card? and suggestions will be appriciated.

Stangy
www.adminfederation.com, www.afnation.com staff

[my77stang]

hmm, been awhile since i did this, lets see what happens......
http://img156.imageshack.us/img156/9956/swithcoolers6fg.jpg
http://img156.imageshack.us/img156/6148/s3rj.jpg
http://img156.imageshack.us/img156/3214/frontview8ch.jpg
http://img156.imageshack.us/img156/2376/sideview1iq.jpg
http://img156.imageshack.us/img156/736/watercooledamd643000andseconda.jpg

[my77stang]

wow, sorry for the HUGE size, anyhow there they are -- wish i could manage the cable clutter a bit better but with the modular cables you can only bend them so far.

if you like to get your game on, check out our website we got pimp ass servers. (bf2, cs, cs source, etc)
www.afnation.com

[playafly187]

running 2.8 ghz now with my 3000+ venice 8)

[FunkZ]

running 2.8 ghz now with my 3000+ venice 8)

How'd you manage that? More info!

[playafly187]

better cooling for one. i raised the case back up a few inches, allowing the rad fans to do their job better. also, i added in a fan controller so i can run my fans at full speed when under load.

as for settings, 310 x 9, 2-2-2-5 1T with 140 mhz divisor, 3.0 mem voltage and 1.7 vcore

[Bio-Hazard]

That's what I'm running for a OC............works pretty good really.

http://img93.imageshack.us/img93/4852/3105ac.jpg

[silenze]

Here is my current setup.. I grabbed the 2005 SR-1 as well to make it equal, the next version will drop our CPU MIP scores by 1k or so...

http://img376.imageshack.us/img376/4562/oc9yy.th.jpg (http://img376.imageshack.us/my.php?image=oc9yy.jpg)

[SBGuitars]

(sorry no oc yet boys)
silenze 3.3+v on ur ram? that safe?

[silenze]

With active cooling it is... 3.4v

http://img322.imageshack.us/img322/1599/img29213wo.th.jpg (http://img322.imageshack.us/my.php?image=img29213wo.jpg)

[Bio-Hazard]

Like silenze said, with good cooling you're good to go........ :wink: I normally clock mine with up to 3.2v............ 8)

[SBGuitars]

my active cooling.
http://lib1.store.vip.sc5.yahoo.com/lib/xoxide/neon-crab-cooler-2.jpg

[playafly187]

uhm, what is that? do you have any more photos?

[silenze]

my active cooling.
http://lib1.store.vip.sc5.yahoo.com/lib/xoxide/neon-crab-cooler-2.jpg

:?: What is that ?? can't tell in the pic..

[SBGuitars]

http://www.xoxide.com/neon-crab-memory-cooler.html

it's nice.. not super functional.. but im tryin to get a "blue crab" theme goin for my case mod comin up... i live in md.. blue crabs are like the state symbol almost haha besides a really up n down baseball team.

[SBGuitars]

i don't have a digi cam.. only promo pics of the cooler.. prolly get a cheap kodak 4mp or somethin for 200 bux this weekend

[silenze]

Interesting, I was wondering how long it would be until someone fabricated such a device.. heeh

[SBGuitars]

saw it while reading a review on the main page and was like :!: [smilie=XXcomputer.gif] [smilie=icon_shaking2.gif] [smilie=icon_thumright.gif] [smilie=la.gif]

[Bio-Hazard]

Those ram coolers come stock with the Abit Fatal1ty AN8 and a few others I think.

http://www.abit-usa.com/images/products/fatal1ty_an8_lg.jpg

They have been out for some time now.

[silenze]

I still like having a couple 80mm's more.. 8)

[playafly187]

[smilie=la.gif]


hahahaha

[Bio-Hazard]

I sort of like the way I've got 3 120's blowing across my MoBo for complete system cooling................ :twisted:

[Phil]

hmm my mobo allows me 2.8 highest vdimm... weaksauce...

update i am now runnin my venice 3000+ appx 2.5ghz (275x9) @ 1.5vcore. 36 idle, 45 load still on stock cooling aint even stuck in the as5 yet, i know im lazy. these chips run very cool.
ram is only at 225mhz 3-4-4-10-2t becuase i can only put 2.8 in it...
gpu (9600 xt) 40 degrees @ +5% on the gpu clock (525/300)

[Bio-Hazard]

I switch my ram to some PQI Turbo PC4000. This is where I'm at 24/7 but still haven't gotten around to checking for max yet.

http://img97.imageshack.us/img97/488/oc8zj.jpg

[Talisman]

Running my Winchester 3200+@ 2.5.......100% stable

[Bio-Hazard]

Memory settings and timings?.................. :lol:

[paulxmn]

CPU Alias Newcastle S754
CPUID CPU Name AMD Athlon(tm) 64 Processor 2800+
CPU Clock 2204.70 MHz
CPU Multiplier 9.0x
CPU FSB 244.97 MHz (original: 200 MHz, overclock: 22%)
Memory Bus 200.43 MHz

Motherboard Properties
Motherboard ID 08/27/2004-nForce-CK8S-6A61CD49C-00
Motherboard Name DFI LANParty UT nF3 250Gb
Chipset Properties
Motherboard Chipset nVIDIA nForce3 250Gb, AMD Hammer
Memory Timings 2.5-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 1T

SPD Memory Modules
DIMM1: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)

BIOS Properties
System BIOS Date 08/27/04
Video BIOS Date 02/15/05
Award BIOS Type Phoenix - AwardBIOS v6.00PG
Award BIOS Message
DMI BIOS Version 6.00 PG

Graphics Processor Properties
Video Adapter nVIDIA GeForce 6600 GT AGP
GPU Code Name NV43GTAGP (AGP 8x 10DE / 00F1, Rev A2)
GPU Clock 526 MHz
Memory Clock 526 MHz

[paulxmn]

CPU Alias Newcastle S754
CPUID CPU Name AMD Athlon(tm) 64 Processor 2800+
CPUID Revision 00000FC0h
CPU Clock 2249.69 MHz
CPU Multiplier 9.0x
CPU FSB 249.97 MHz (original: 200 MHz, overclock: 25%)
Memory Bus 204.52 MHz
Motherboard Name DFI LANParty UT nF3 250Gb (5 PCI, 1 AGP, 3 DDR DIMM, Audio, Gigabit LAN)

Chipset Properties
Motherboard Chipset nVIDIA nForce3 250Gb, AMD Hammer
Memory Timings 2.5-3-3-6 (CL-RCD-RP-RAS)
Command Rate (CR) 1T

SPD Memory Modules
DIMM1: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)

BIOS Properties
System BIOS Date 08/27/04
Video BIOS Date 02/15/05
Award BIOS Type Phoenix - AwardBIOS v6.00PG
Award BIOS Message
DMI BIOS Version 6.00 PG

[Jelly]

http://img223.imageshack.us/img223/9759/sempron24000cz.jpg (http://imageshack.us)


http://img210.imageshack.us/img210/4681/mem4ok.jpg (http://imageshack.us)


Normally a Sempron2400+ (1.666Ghz)

Here is the most stable CPU o/c I get for fun.

But I go back to 10*200, as this is the only way to run my RAM at dual channel 400Mhz... :(


[/img]

[playafly187]

http://www.ocia.net/playafly187/cpuzx2.jpg

it can do 2.8 ghz but i dont wanna push it since i just got the new mobo installed a few min ago...

[FunkZ]

Nice overclock! But what happened to the other motherboard?

[Trunks]

check out the CHUA thread in hardware

[silenze]

Oh yeah I guess I can post this here...

http://www.callatg.com/~valley1/285.jpg

[A_Deer]

This is as fast as i can get it without the memery slowing down....


http://i35.photobucket.com/albums/d164/A_Deer/Overclock.jpghttp://i35.photobucket.com/albums/d164/A_Deer/Memclock.jpg

[playafly187]

Nice overclock! But what happened to the other motherboard?

i went to change some memory timings... the settings didnt work, went to restart... dead after that. four red leds on the diagnostics, would never post after that. tried every trick i know...

[Neo_Bui]

http://i12.photobucket.com/albums/a247/Neo_Bui/Overclock.jpg

i used a program called clockgento overclock in windows without having to shutdown

[playafly187]

bumped back up to 2.8, rock stable :mrgreen:

http://www.ocia.net/playafly187/x2cpuz2800.jpg

[jester]

bumped back up to 2.8, rock stable :mrgreen:




Got any sandra benchmarks?

[silenze]

Both of our's are here: http://forums.ocia.net/viewtopic.php?p=18996#18996

[playafly187]

bumped back up to 2.8, rock stable :mrgreen:




Got any sandra benchmarks?

posted in sandra benchmark thread...

[nine]

Intel 2.8 ghz prescott overclocked to 3.7 stable, 38 degrees idle, 40 Load
(Aquagate liquid cooling is nice...very nice)

[jester]

I picked up a new heatsink last week (zalman with the 120mm fan) & trashed the coolermaster.

So far Ive been able to crank my old p4 up to 3.495g (736fsb) hitting about 50c @load. :mrgreen:

[silenze]

Intel Core 2 Duo E6400 @ 413x8, 3.3Ghz @ 1.4v 24/7 with Noctua NH-U12 and 120mm fan rated for 79CFM.

Highest bench: 3,648Mhz <-- 1.5Ghz overclock! :P

http://www.silenze.org/16-375.jpg

[jester]

Thats insane for air cooling :vomit:

[Avalanche]

That is insane for 1.2V!!

[silenze]

That is insane for 1.2V!!

CPU-Z bug actually..

Dual prime stable 3200Mhz @ 1.375v

3600Mhz benchable @ 1.537v
3648Mhz benched, and in that screenshot @ 1.562v

[Avalanche]

I see... Still an awesome overclock!!!

[silenze]

This E6600 I just got is even more amazing..

Still using the same air cooling, so far I've done an hour of dual-prime95 at 3.4Ghz with just 1.35v, 3.2Ghz with just 1.3v... benches 3.6Ghz with just 1.4v...

[Slobbingham]

Hi everybody im a newb but good to have stumbled upon your site. This is my FX-55. Thoughts and ideas are welcomed. I am here to learn.

http://img143.imageshack.us/img143/5959/30ghzbw3.jpg

[Avalanche]

Hi everybody im a newb but good to have stumbled upon your site. This is my FX-55. Thoughts and ideas are welcomed. I am here to learn.

http://img143.imageshack.us/img143/5959/30ghzbw3.jpg

Very nice under 1.4V and hitting 3.0... Are you using this as a 24/7 setting?

[silenze]

Slobbingham: You would be more than safe to run 1.6v through that CPU on air cooling if the temps hold up alright, so you could probably get an even higher clockspeed out of it if that is prime/orthos stable.. and having an FX you can step it up in small increments from there using the multiplier, HTT and mem divisors to your advantage..

[Janus]

Mine's fairly tame compared to a lot of these, but:
Asus P5N-E SLI motherboard
Intel Core 2 Duo E4400 Allendale 2.0GHZ, overclocked to 2.8GHZ (unlinked from memory)
Stock Intel heatsink/fan
Asus Geforce 8600 GT video card, overclocked from 540/700 to 630/825
Antec Sonata case with 2 120mm fans, one in front pulling air in around the hard drives and one in back.

Runs extremely quietly and stably; my central air conditioning system is louder.
I've heard of many people pushing the E4400 over 3GHZ, but 2.8GHZ stable works for me.

EDIT: oh, and no voltage tweaking done either.

[playafly187]

http://www.ocia.net/playafly187/e7200oc.jpg

finally got around to pushing this new processor some. i'm pretty sure it has a good bit left in it. temps are in the low 50s C with a room temp around 75 F (i do review testing at a room temp of 70 F). been running this a few days perfectly stable.

[Bio-Hazard]

My little old Quad.

http://img384.imageshack.us/img384/2576/maxocxb7.jpg

[fstroupe]

Damn. That's incredible.

[Bio-Hazard]

Got lucky and got a extremely good OC'ing chip.